AudioQuest Evergreen Series 1 M./3.3 Ft. Analog Audio Interconnect Cable

AudioQuest EVERGREEN3POINT52RCA1M Evergreen Series 1 M./3.3 Ft. Analog Audio Interconnect Cable

Features

• Solid Long-Grain Copper Conductors (LGC)
  Solid conductors eliminate strand-interaction distortion. Evergreen’s solid
  Long-Grain Copper allows a smoother and clearer sound than cables using regular
  OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry
  specification regarding “loss” without any concern for distortion.
  LGC has fewer oxides within the conducting material, less impurities, less
  grain boundaries, and definitively better performance
• Foamed-Polyethylene Insulation
  Any solid material adjacent to a conductor is actually part of an imperfect
  circuit. Wire insulation and circuit board materials all absorb energy (loss).
  Some of this energy is stored and then released as distortion. Evergreen uses
  air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs
  next to no energy and Polyethylene is low-loss and has a benign distortion
  profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus
  effect common to other materials
• Metal-Layer Noise-Dissipation System (NDS)
  100% shield coverage is easy. Preventing captured RF Interference from modulating
  the equipment’s ground reference requires AQ’s Noise-Dissipation
  System. Noise-Dissipation System prevents a significant amount of RFI from
  reaching the equipment’s ground plane
• Double-Balanced Asymmetrical Geometry
  Purpose designed for single-ended applications, Double-Balanced Asymmetrical
  Geometry offers a relatively lower impedance on the ground for a richer, and
  more dynamic experience. While many single-ended cable designs use a single
  path for both the ground and the shield, Double-Balanced designs separate
  the two for cleaner, quieter performance
• Cold-Welded Gold-Plated RCA Plugs
  This plug design allows for a connection devoid of solder, which is a common
  source of distortion. Because the ground shells are stamped instead of machined,
  the metal can be chosen for low distortion instead of machinability